The Calendar planner (/planning) shows the lessons, course sessions, exams and other items (holiday, office, sick…) of your instructors. You plan new items, move them by dragging, and take each item to its next step. Conflicts are checked before anything is saved.
How do I switch views and find items?
- Choose List, Month, Week or Day. Use the arrows, Today or the date field to move through time. In Month view, click a day to open it.
- Filter on Location, Instructors, Student, Type and Status. Clear filters resets them.
- In List view, set From and To (at most about two months).
- Click an item to open its details and buttons on the right.
On a phone the planner opens in Day view (a week does not fit), and the filters are folded away behind the Filters button (a number on it shows how many are set). List shows each item on two lines there: time and student, then type and status.
How do I plan a lesson?
- Click Plan, or click an empty time slot in Week or Day view.
- Choose Lesson, then the Branch and Instructor.
- Search in Students (only students with an active enrollment at that branch appear; some license types allow several students).
- Check the Enrollment (with hours remaining and hours left to plan) and the License type.
- Set Date, Start, End, and optionally Vehicle and Note.
- Click Save, or Book anyway when there are warnings.
New lessons are saved as a draft (status Planned). Open the lesson afterwards and click Confirm, or Send proposal to let the student accept it.
How do I book a time slot without an instructor (capacity planning)?
With capacity planning switched on (Academy settings › Planning), planners see Book time slot next to Plan.
- Click Book time slot.
- Search the student and choose the Training.
- Pick a time; each one shows how many places are left. Use the arrows to go to another week.
The lesson is saved as a draft without an instructor. Confirm it or send a proposal as for any lesson.
You can also book straight from the calendar. In Week or Day view, with a location chosen (or when there is only one), each day has a narrow column on the right with the time slots of one category and the number of places left. Choose the category under Capacity in the filters, or Do not show to hide the column.
- Click a time slot with places left in that column.
- Search the student; only trainings at that location and in that category are offered.
- Click Book this time slot. When the time is not free for that student, pick another one from the list below it.
Clicking next to the column still plans an ordinary lesson. Full time slots and times already started are shown greyed out and cannot be clicked.
How do I see how full the time slots are?
With capacity planning switched on, Planning › Capacity shows a week per location and category.
- Choose the Branch, and the Category when there are several. Use the arrows for another week.
- Each time slot shows the booked places against the capacity, for example 3/4. The colour shows how full it is: green has room, orange is almost full, red is full, grey has no instructor available. A people icon with a number shows how many lessons still have no instructor.
- Click a time slot to see its lessons. Open in the planning opens a lesson, where you can assign the instructor.
How do I offer time slots only on certain days or hours?
Without a weekly pattern, a location has time slots every day between its day start and day end (Settings › Organisation, the location's planning hours). With a weekly pattern you choose the times yourself, for example Monday to Friday 8:00–12:00 and 13:00–17:00, and Saturday morning. You need the permission Edit the weekly pattern of capacity slots (by default Administrator and Manager; see Users › Roles).
- On Planning › Capacity, choose the Branch and click Weekly pattern. Or open the location under Settings › Organisation and click Manage next to Capacity weekly pattern.
- Tick Use a weekly pattern. Monday to Friday are filled in with the location's hours to start from.
- Per day, set the windows with From and To. Add window adds one; the cross removes it. A day without a window has no time slots. Copy to Tuesday–Friday copies Monday's windows.
- Optional: under Max. per category, the most places per time slot in that window, for example when only two motorbikes are available. Leave it empty for no maximum.
- Click Save.
Time slots are made within each window, with the slot length and break of the Academy settings. There are never more places than instructors available. Lessons already booked stay, also outside the new pattern: after saving, the window lists the future lessons that now fall outside the pattern or above a maximum, each with Open in the planning, so you can move or cancel them. Click Done to close it. Untick Use a weekly pattern and save to go back to time slots all day, every day.
How do I close a time slot or offer fewer places?
On Planning › Capacity, click the time slot. Under Limit places you see how many places the instructors' hours allow.
- Save maximum: offer at most that many places for the category shown. Add a reason if you like.
- Close for the category: no more bookings for that category in this time slot.
- Close for all categories: no more bookings for any category in this time slot.
- Remove limit or Reopen for all categories undoes it.
Every change is recorded with who made it and when: under Changes to this time slot in the same panel, and in the location's history (Settings › Organisation, open the location).
A limit only takes places away: setting a higher number than the instructors allow adds nothing. Lessons already booked stay: when the time slot now has more bookings than places, a warning says how many are too many and lists its lessons, each with Open in the planning, so you can move or cancel them. A lock shows a closed time slot in the grid, an arrow a time slot with fewer places. Customers in the portal and in the online registration no longer see the time slot, or see fewer places.
A limit belongs to the time slot's start time. When the slot length or break (Academy settings), the location's hours or the weekly pattern change, a limit can end up on a time that is no longer the start of a time slot; it then no longer counts. Right after saving such a change you are told how many limits this concerns and can remove them, or leave them.
What does "Not assigned" mean?
A lesson booked in a time slot (by the customer in the portal, or with Book time slot) has no instructor yet. It shows Not assigned with a dashed border. Tick Not assigned only in the filters to see just those.
- To assign one straight away: open the lesson. It shows the suggested instructor and vehicle and why (the training's preferred instructor, the one who gave the student's previous lesson, or the least busy that day). Click Assign now. If nobody can take the lesson, it says so: pick an instructor yourself or move the lesson.
- To pick another instructor yourself: open the lesson, click Edit and pick the instructor. Their default vehicle comes with them.
- Otherwise an instructor is assigned automatically the set number of hours before the lesson. When nobody is free, planners get a notification.
- Release instructor sends an assigned lesson back, so that another instructor is assigned.
- A lesson without an instructor cannot be started.
- When leave is approved with Cancel these lessons, these lessons are not cancelled: they get another instructor.
How do I send a lesson proposal to a student?
- Open a lesson with status Planned and click Send proposal. Or open the customer, go to the Lessons tab and click Send lesson proposal.
- A window lists all upcoming Planned lessons of that customer, all ticked. Untick the lessons you do not want to propose yet, then click Send proposal.
- The customer receives one e-mail with all ticked lessons. The status of those lessons becomes Pending.
- If the student has a customer portal login, they can accept or decline each lesson in the portal. Accepting confirms the lesson; declining cancels it without a fee. Planners who are online and the lesson's instructor get a notification of the answer.
A proposal for a group lesson goes to every student on it, and each answers for themself in the portal:
- Accept confirms the student's own place. The lesson stays Pending until every student on it has accepted, then it is confirmed and each student gets the confirmation e-mail. Open the lesson to see, next to each student, accepted or no answer yet.
- When everyone has accepted but the lesson cannot be confirmed because the training it runs on has too few hours left, the last acceptance still counts. The lesson stays Pending and planners get the notification Group lesson cannot be confirmed with the name of the student whose hours are missing. Add hours or choose another training in the lesson, then click Confirm.
- Decline takes that student off the lesson, which stays for the others. You get the usual notification with the student's name and message; agree on another moment with them. When the lesson's hours were booked on that student's training, they move to the training of the next student on the lesson who has one for this category and location. When nobody left has one, the lesson cannot be confirmed: planners get Group lesson cannot be confirmed. Choose a training for the lesson and confirm it, or cancel it.
- Putting a student who declined back on the lesson (for example after agreeing with them by phone) counts as their acceptance. Saving first warns that the student declined in the portal, so a lesson window that was open before they declined does not put them back by accident. When everyone else has accepted too, the lesson is confirmed on saving and each student gets the confirmation e-mail. A student you take off the lesson no longer counts for it.
- When every student declines, the lesson is cancelled as a declined proposal.
- The reminder e-mail goes only to the students who have not answered; the notification about an unanswered proposal lists who accepted and who has not answered yet.
- You can still Confirm a pending group lesson yourself, for example when the others answered by phone.
Planning 5 lessons back to back and proposing them together sends the customer one e-mail instead of five.
A lesson is not proposed when it is no longer Planned, lies in the past, or none of its students has an e-mail address. Lessons without an e-mail address are shown unticked with a warning. The other ticked lessons are still sent. The lessons that were not sent stay Planned. You get a notification under the bell in the top bar that lists each of them with the reason.
How do I move or shorten an item?
- In Week or Day view, drag an item to a new time, or drag its bottom edge to change the end time.
- Or open the item, click Edit, change the fields and click Save.
- If the move causes a conflict, a Scheduling conflicts window asks Move the item anyway? Click Book anyway to keep it, or close the window to undo the move.
How do I move a lesson through its steps?
Open the lesson and use the buttons: - Planned: Confirm, Send proposal, Cancel - Pending or Confirmed: Start, Cancel (starting a pending lesson also confirms it) - In progress: Mark done, Cancel
Done or cancelled items can no longer be changed.
How do I cancel a lesson?
- Open the lesson and click Cancel.
- Choose a Reason and optionally add a Note.
- Tick Charge a cancellation fee if needed and check the amount in Fee (fixed amount). Choosing a reason fills this in from the reason's settings.
- For a lesson the customer already knew about (a proposal sent, confirmed or in progress), Inform the customer is ticked: the customer gets the standard e-mail "Lesson cancelled" and, if they turned notifications on, a notification on their phone. Optionally write a Message to the customer (for example why the lesson cannot take place); it goes into the e-mail. The reason and the note stay internal; a fee you charge is mentioned in the e-mail. Untick it when you already told the customer yourself, for example by phone. A planned lesson that was never sent tells nobody.
- Click Cancel item.
The text of the e-mail can be changed under Mail templates (standard e-mail "Lesson cancelled").
When the lesson starts within the location's late-cancellation window, the dialog shows a warning such as "This lesson starts within 48 hours."
How do I block time for an instructor (holiday, office, sick)?
- Click Plan and choose Other.
- Pick Branch, Instructor, enter a Title and choose a Category (Holiday, Office, Sick, Other).
- Set the date and times and click Save.
These blocks count as the instructor being busy in the overlap check. They can be edited or removed with Delete.
Good to know
- Statuses: Planned (draft), Pending (proposal sent), Confirmed, In progress, Done, Cancelled. An open item whose end time has passed shows as Ended.
- Conflict checks run while you fill in the dialog. They look at: instructor, vehicle or room already booked; the student already having an appointment; the instructor or student being unavailable (availability statuses that Blocks planning); and the maximum lessons per instructor per day. Each location sets per rule Ignore, Warn (Book anyway is possible) or Block (saving is refused), under Settings > Companies and locations.
- Book anyway over a double booking accepts that one overlap: the two items do not warn about each other again while both stay where they are. Anything else planned at that time still gets the warning about both, and moving either item checks again. Book anyway over another warning (availability, working hours, hours left, vehicle documents, …) only lets that save through: the item still counts when other items are planned around it.
- Times must fall on the location's planning grid (for example every 30 minutes).
- A vehicle whose Inspection valid until or Insurance valid until date has passed on the day of the lesson or exam gives a warning when you plan it, move it or choose that vehicle; Book anyway is possible. To keep a vehicle out of the planning altogether, tick Blocked on the vehicle. A customer booking that waits for your confirmation shows the same warning in its details (vehicle and trailer), also when it already got an instructor and vehicle automatically; no notification is sent for it. When such a lesson is confirmed automatically (a customer booking at a location that confirms bookings by itself) or a time-slot booking gets its instructor and vehicle automatically, the planners of the location get a notification with a link to it: once per lesson, vehicle and day, so a lesson that later gets another vehicle that has expired, or moves to another day, is reported again.
- A lesson is refused when the instructor does not work at the branch or is not qualified for the license type, the vehicle is blocked or not allowed for that instructor, or the license type needs a vehicle and none is chosen.
- Confirm is refused when a student is blocked or the enrollment has not enough hours left; while planning these are only warnings.
- Marking a lesson done or cancelling it updates the enrollment's hours.
- If the cancel reason has an invoice product and the student's order is still open, the fee is added to that order.
- The branch of a lesson cannot be changed after creation.
What does an instructor see?
Instructors without planner rights only have Calendar planner, Instructor ride sheets, My hours, My leave, My availability and My account in the menu. They see and change only their own items, have no Location or Instructors filter, can only plan students with an active enrollment at their own branches, and only get cancel reasons marked Selectable by instructors. Settings and resource screens are not available to them.
Not possible (yet)
- Recurring or repeating lessons, or copying an item.
- Dragging items in Month or List view (only Week and Day).
- Printing or exporting the calendar.
- Automatic reminders to students before a lesson, or automatic messages to instructors when their planning changes.
- Undoing a cancellation or reopening a done item.
Did not find what you were looking for?
Submit a ticket