Skip to Content
The BIQSDRIVE support centre To www.biqsdrive.com

Staff (HR): employees, work schedules, leave, attendance and Dimona

The Staff menu group holds the HR records of instructors and office staff. Everyone who has an employee record also sees My hours and My leave; instructors find them in their own menu.

Employees and work schedules

  • Employees (/hr/employees) lists instructors and office staff. Instructors are added automatically when the instructor is created; office staff are added with New and can be linked to their login.
  • The Work schedule tab of an employee holds periods: a shared schedule (from Work schedules, /hr/schedules) or a schedule of their own, from a start date. A two-week rota (week A / week B) is possible; week A is the week of the start date. The next two weeks are shown underneath.
  • Public holidays (/hr/holidays) are days nobody of the company works. Belgian and Dutch statutory holidays are filled in automatically; administrators add closure days or fill in another year with Fill in public holidays.
  • For instructors, the tab Availability & online booking sets the hours customers may book online (only the part within the work schedule counts) and weekly availability moments (for example "not available on Wednesday afternoons"). Planners without access to Staff find the same moments behind the Availability button on Resources › Instructors.

How do I warn planners who plan outside working hours?

Per location, under Settings › Companies and locations › the location › conflicts, set Outside working hours or on a public holiday to Warn or Block. Instructors without a work schedule are not checked.

Leave

  • My availability (/my/availability, instructors only): your own weekly availability moments. Add, change or remove a moment with a status such as "Preferred" or "Unavailable"; a status that blocks planning keeps planners from planning you then and keeps those times out of online booking.
  • My leave (/my/leave): the balance per year, your requests, Ask for leave and Report sick. The hours a request takes are worked out from your work schedule and shown before you send it. You can withdraw a request, or approved leave that has not started yet.
  • Leave (/hr/leave): requests waiting for a decision and all requests. Opening a request shows what is planned for the instructor during the leave. Lessons stay planned unless you tick Also cancel the lessons when approving, or press Cancel lessons on leave that is already approved (for example sickness). They are cancelled without a fee and customers who knew about the lesson get the usual cancellation e-mail. Exams and course sessions stay: move them yourself in the planner. Reject needs a reason. Register leave enters leave for someone (approved at once when you may approve).
  • Approved leave of an instructor appears as a block in the planner and in the timesheet (Leave / Sick / Office), and is never offered for online booking.
  • Entitlements are entered per employee and year on the Leave tab of the employee (in hours; several lines add up, for example a carry-over).
  • Leave types (/hr/leave-types): the kinds of leave, whether they need approval, count against the balance or need a certificate. For sickness, HR fills in the date the certificate was received.

Attendance (check in and out)

Switched on per company in the Academy settings (Time registration).

  • The Check in button in the top bar, or My hours (/my/hours), records worked time. Nothing is checked out automatically: forgot to check out? HR corrects it, and after the company's limit both get a reminder.
  • Instructors can get their day proposed from the planning (lessons as they took place, exams with travel time, course sessions, office blocks) and Confirm it.
  • Attendance (/hr/attendance) shows per employee the scheduled hours, leave, worked hours and the difference for a period, with a CSV export. PDF gives one page per employee per month with the worked times of every day, the totals and room for both signatures; on a person's card it gives only theirs. Click someone to see their days and add, correct or delete time. Every change you make there is kept on the History tab of the employee, with the old and new times.

Attendance kiosk (a fixed tablet or PC)

Employees can also check in and out at a tablet or PC at a fixed place, without signing in.

  • Switch on Attendance kiosk in the Academy settings (Time registration) and choose how people identify: PIN, badge, badge or PIN, or badge + PIN. When you choose PIN, a warning under the choice suggests badge + PIN for kiosks that customers or visitors can reach (see the PIN lock below).
  • Also in the Time registration settings: after how many wrong PINs within 24 hours a kiosk switches itself off (default 50), and when a kiosk day starts (default 04:00).
  • Kiosks (/hr/kiosks): Register a device for a location. You get a pairing code, valid for 15 minutes. On the tablet, open the address shown (or scan the QR code with it) and type the code. Only registered devices work. Every employee of the company can check in at any of its kiosks.
  • Lost or replaced the tablet? Pair again (the old one stops at once) or remove the device. Worked time registered on it is kept.
  • PINs have 6 digits and are made by the system: nobody chooses one. Employees press New PIN under My hours; HR can do it on the employee page (Details tab). The PIN is shown once, so note it right away; the old PIN stops working. HR can also clear a PIN.
  • Badges (a QR code): HR makes, prints or revokes them on the employee page; a new badge makes the old one useless. The print button on the Kiosks page prints the badges of everyone at that location. Print on A4 (cut them out) or on a card printer (one card per page).
  • NFC cards: instead of (or next to) a QR badge, an employee can check in with an NFC card. You need a USB card reader (13.56 MHz, one that types the card number like a keyboard) at the kiosk and one at the PC where you link the cards. On the employee page choose Link card and hold the new card to the reader; the card is linked at once. A new card replaces the old one; Unlink card stops it. The readers may be set differently: a card is recognised whether the reader types its number in hex (also padded to 10 characters) or as a number (with or without leading zeros), in either order. Readers set to Wiegand 26 or "3+5" (a facility code and a card number, such as 123,45678) also work, with one limit: they type only part of the card number, so they work best with ordinary 4-byte cards (MIFARE Classic), and with longer card numbers only when the card was linked on such a reader too. Readers that type the whole card number are the better choice. A card counts as a badge: it works in the modes badge, badge or PIN and badge + PIN.
  • At the kiosk, identifying checks you in, or out when you are checked in. Scanning twice within 2 minutes changes nothing. Badges are read by a USB or Bluetooth barcode scanner, or by the camera of the tablet; cards by the USB card reader.
  • Forgot to check out? If you are still checked in from an earlier day, the kiosk checks you in for today and tells you so. The old check-in is kept without a check-out time and marked not checked out on the Attendance page; HR gets a notification and fills in when you left. A marked check-in counts no hours until HR corrects it.
  • Shifts past midnight: a kiosk day starts at the time set in the Time registration settings (default 04:00). Checking out before that time still closes the check-in of the evening before. A check-out more than 24 hours after the check-in is never accepted; HR then corrects the hours.
  • A badge or card can be copied. Anyone with a phone can read an NFC card's number from a few centimetres away and write it onto a cheap blank card, just as a QR badge can be photographed or photocopied. In the modes badge and badge or PIN, such a copy checks in and out as that employee. Where that matters, choose badge + PIN: a copied card is then useless without the PIN. If a card or badge is lost, HR unlinks the card or revokes the badge on the employee page at once; it stops working immediately.
  • After 5 wrong PINs the PIN pad of that kiosk is locked for 1 minute, then 5, then 15 minutes if it goes on. Badges keep working (in the modes with badges), and HR gets a notification. HR can open the PIN pad at once with Unlock on the Kiosks page; that is written in the history of the location.
  • The lock counts wrong PINs per kiosk, not per person, so someone at the kiosk can keep the PIN pad locked on purpose by typing wrong PINs every 15 minutes. With PIN only, nobody can then check in at that kiosk; they use the Check in button with their own login, or HR adds the times on the Attendance page. HR can Unlock it, but someone who keeps typing wrong PINs locks it again; Pair again does not clear the lock. After 50 wrong PINs within 24 hours (or the number set in the Time registration settings) the kiosk switches itself off and shows the pairing screen again; HR gets a notification and pairs it again. Unlocking does not reset that count.
  • Advice: where customers or visitors can reach the kiosk (a reception desk), choose badge + PIN (the PIN is only asked after a valid badge, so a stranger cannot lock the pad) or badge. Keep PIN for kiosks that only staff can reach.
  • Times checked in at a kiosk show Kiosk and the device name on the Attendance page.

Dimona (flexi and student workers)

BIQS can declare your flexi-job and student workers to the RSZ (Dimona), day by day. Other staff are not declared: your social secretariat keeps doing that.

  • Set up (Academy settings › Dimona, for administrators with the HR settings permission; Belgian companies only): 1. Switch on Declare flexi and student workers in Dimona and save. 2. In the Dimona panel, choose Generate key pair (or import your own private key). 3. In Chaman on socialsecurity.be, register a REST client for your company with that public key (copy it as PEM or JWKS) and give it access to Dimona. 4. Enter the client ID Chaman gives, the joint committee of these workers and, if you like, your RSZ employer number. The enterprise number is taken from the company's VAT number. Save. 5. Test the connection. Start in the Simulation environment (nothing is really declared) and switch to Production once a test day is accepted. 6. Students who work at a location with another address than the company are declared with that place of work: enter the NIS code of its municipality in the panel.
  • Who: active employees with the contract type Flexi job or Student and an INSZ number (employee page › Edit). Without an INSZ nothing is declared; the Dimona page lists who is missing one.
  • From the planning (default): every day is declared ahead (today and tomorrow, or more days if you set it) with the planned work: confirmed lessons, booked exams with the travel time, course sessions and office blocks; for office staff their work schedule. A change in the planning corrects the declaration at once; a day without work any more is cancelled, unless its work had already begun: then the day stays declared, you get a notification, and the Dimona page shows No planned work any more on it. Cancel it there if the work did not take place. Flexi workers can get extra minutes before and after the day.
  • From the check-ins: the day is declared when the employee checks in (until the end of the planned work, or a number of hours you choose) and corrected at the check-out. This needs attendance tracking.
  • Staff › Dimona (/hr/dimona) shows every declared day: what was declared, the status (to send, awaiting answer, accepted, accepted with warning, refused, not sent, cancelled), the Dimona number and the RSZ's remarks. Fold out a day to see each declaration. Problems only shows what needs attention.
  • Send again: after correcting the data (for example the INSZ), or to send a pending change now.
  • Cancel at the RSZ: the person did not come. The day is then no longer declared automatically until you choose Declare automatically.
  • Declare as ordinary worker: only on a day accepted with a warning (for example the flexi-job conditions are not met, or the student's yearly quota is exceeded). It cancels the flexi or student declaration of that day and declares the same day again as an ordinary worker, with the company's joint committee. It takes a few seconds. Only that day changes, and it is no longer declared automatically; the following days stay as they are, so check them yourself.
  • The employee page has a Dimona tab with the same list for that person and Declare now.
  • When a declaration is refused, cannot be sent, or is accepted with a warning (for example the flexi-job conditions are not met, or the student's yearly quota of hours is exceeded), everyone with the Dimona permission at that location gets a notification. If the RSZ cannot be reached, BIQS tries again by itself.

Not possible (yet)

  • Uploading a sick note: only the date it was received is kept.
  • Payroll export from worked time.
  • Dimona for other employees than flexi and student workers.

Did not find what you were looking for?

Submit a ticket