Skip to Content
The BIQSDRIVE support centre To www.biqsdrive.com

Trial, test inbox, going live and the setup guide

A school that signed up on the BIQSDRIVE website starts with a 30-day trial: every feature is switched on, there are no seat limits, and the platform is filled with a sample driving school ("Rijschool Rijwijs") with instructors, vehicles, students and a planning to practise on. During the trial nothing really leaves the platform: e-mails, text messages and push messages go to a test inbox instead of to people, and connections with outside services are not made.

The strip across the top of the app shows how many days are left: Trial: … days left. Administrators also see the links Test inbox, Setup guide and Go live there.

How do I see what the platform would have sent?

Open Test inbox in the strip at the top (/sandbox-inbox).

  • The list shows the newest first. Filter with Everything, E-mails, Text messages, Push messages or Connections; the number next to each says how many there are.
  • Click a line to open it: an e-mail is shown as the customer would see it, with sender, recipients, subject and attachment names. Images in the e-mail, such as your logo, are shown too (except images over 1 MB). Back to the list returns.
  • Connections are outside services the platform wanted to use. During the trial these are not made: in the app they behave as if the service cannot be reached. Online payments, the bank connection, the Autoveiligheid exam centres, the accounting package, itsme, the eID card reader, Dimona, the review sites and the server-side ad conversions are the exceptions: see below.
  • Refresh reloads the list; Empty the test inbox removes everything in it.

To try it: plan a lesson or send a customer a message, then look in the test inbox.

How do I try online payments during the trial?

During the trial, payments go through a test payment provider instead of PAY.NL: no account is needed and no money moves.

  1. Switch on online payments (and payment links, or terminal payments) in Settings › Academy settings, as a live school would. The payment provider chosen there is not used during the trial.
  2. Send a payment link from an order, or open it yourself. The pay page leads to a Test payment page that shows the amount and description, with Pay (test) and Cancel the payment.
  3. Choose one: the payment is booked at once, and the pay page shows the outcome. The order shows it too.
  • A refund of a test payment is done at once.
  • For terminal payments: open Settings › Payment terminals (/settings/payment-terminals), click Fetch terminals from PAY.NL (during the trial it lists the Demo terminal, code TH-0000-0000) and click Register. A payment sent to it is paid by itself after about 8 seconds.
  • Test payments disappear with the rest of the trial; once live, payments go through your real payment provider.

How do I try the bank connection during the trial?

During the trial, Settings › Bank connection (/settings/bank-connection) connects to a demo bank instead of Ponto: no Ponto account is needed and no real bank account is read.

  1. Click Connect Ponto (with several companies, choose the company first); the page says it is a demo bank. The window closes by itself: the connection is made, with one demo account in the company's name.
  2. Open Finance › Bank transfers and click Fetch now. Transfers come in for the confirmed orders that still have something to pay, each in its own way, so you see every case: - with the order's structured communication: booked on the order by itself (some pay the full amount, some half, so the order is partly paid); - with the order number in the message, or with no message but the customer's name and the exact amount: proposed, link it with one click; - one transfer that belongs to no order (a subsidy): put it aside.
  3. Confirm an order of your own (or send one): the next Fetch now brings its transfer in too. Each order pays once.

The transfers disappear with the rest of the trial; once live, connect your real Ponto account.

How do I try exam bookings during the trial?

During the trial, the Autoveiligheid exam centres (Exam bookings, /resources/exam-bookings) are demo exam centres: no API key is needed, and nothing is booked at Autoveiligheid. The connection shows as switched on, environment Test.

  1. Click Synchronise all centres (or Synchronise on one centre). Free exam moments come in for the weekdays ahead: practical exams for B at the car centres and for A at the Cat A centres, now and then one for the other categories, and on some days time reserved for your school from 07:30.
  2. Click Book an exam, choose the student and the exam type, and book a moment. The booking follows the usual rule: with a complete student file the exam is booked and the candidate is "sent"; without a provisional licence (the sample students have none) it stays a draft until you add one.
  3. Under Booked directly at the exam centre, two appointments appear once the appointments are checked (every two hours, or at once with Check appointments on the first car centre, AV Deurne in the Belgian package): on a weekday about ten days before the trial ends, one for a sample student (Link to student) and one for someone new (Create customer).
  • To see a refusal: book a second practical exam for a student who already has one booked (with the candidate sent). The demo centre refuses the candidate as Autoveiligheid does: "the student already has an active appointment for this type of exam". The exam stays a draft, with that message.
  • Reserved time you give back is no longer offered that day.

The moments are made up and the same every time; a cancelled exam frees its moment again. Everything goes with the rest of the trial. SBAT centres are planned by hand, as for every school.

How do I try the accounting package during the trial?

During the trial, orders sent to an accounting package go to a demo version of it: no login, key or Connect is needed, and nothing reaches the package.

  1. In Settings › Academy settings, group Sales and payments, switch on Send orders to the accounting package, choose the Accounting package and save. The section Connection with the accounting package says it is the demo version; the package's own fields can stay empty.
  2. On a confirmed order, click Send to … (or Send all open orders in the settings). The order then counts as invoiced, with a reference starting with DEMO-, and can no longer be cancelled, as with the real package.
  3. Open the Test inbox, filter Connections: each order shows the invoice the package would have received (for Business Central and AFAS a sales order), with the customer, the lines, VAT and totals, and the structured communication for the packages that take one.
  4. To see a refusal: send an order for a customer without a postal code and city. The demo package refuses it, as the real packages do; the order shows the message, and after you fill in the address, Send again sends it.

WinBooks, Adsolut, Expert/M Plus and Visma AccountView work with a file you download: that works during the trial as it does once live. Everything goes with the rest of the trial; once live, connect your real package.

How do I try itsme and the eID card reader during the trial?

For a Belgian school, New customer with itsme and New customer with eID card (on the customer list) work during the trial without an itsme contract, a card reader or a card: nothing reaches itsme or the card service.

  1. itsme: click New customer with itsme and open the QR code's link (on a phone, or click it on the computer). Instead of the itsme app, a demo page opens: Share my details confirms with a demo person, Cancel shows what happens when the customer says no.
  2. eID card: click New customer with eID card. Instead of the card reader, the window that opens shows the same demo page: Share my details reads a demo card, Cancel stops the reading.
  3. The dialog then shows the person's details, as itsme or the card would give them: name, date and place of birth, national register number, card number and validity, address. Click Create new customer: the form opens filled in, with those fields locked.

Each reading gives the next of six demo persons (Lotte Vermeulen, Thomas Dubois, Sarah Peeters, Lucas Janssens, Nora El Amrani, Milan De Smet); the seventh is the first again, so you also see This is the customer for a customer made earlier. Each demo person has a plain portrait as photo. itsme in the online registration works the same way, and Test the connection in the itsme settings answers from the demo.

How do I try Dimona during the trial?

For a Belgian school, Dimona goes to a demo version of the RSZ during the trial: no Chaman client, key, joint committee or VAT number is needed, and nothing is declared for real.

  1. In Settings › Academy settings, section Dimona (flexi and student workers), switch on Declare flexi and student workers in Dimona, choose whether the planning or the check-ins decide, and save. The section's panel says it is the demo version.
  2. Give an employee the contract type Flexi or Student and an INSZ number (Staff).
  3. Plan work for them (or let them check in): their days are declared and accepted within a few minutes, and corrected or cancelled when the work changes. Follow them under Staff › Dimona.
  4. The Test inbox, filter Connections, shows each declaration (IN, UPDATE, CANCEL) as it would have gone to the RSZ.
  5. To see a warning, give a flexi or student worker a day of more than 10 hours (plan it, or check in and out). The demo accepts it with the warning the RSZ gives when the flexi-job conditions are not met, or when the student has used up their hours. Those with the Dimona permission get a notification, and on that day in Staff › Dimona you can try Declare as ordinary worker.
  6. To see a refusal, give a flexi or student worker the INSZ number 90.01.01-001.23. The demo refuses their days as the RSZ refuses an invalid INSZ, and those with the Dimona permission get a notification. Correct the INSZ on the employee page: the day is declared again by itself and accepted. Send again on the day in Staff › Dimona also works.
  7. To see a wait for identification, give a worker a BIS number, for example 90.41.01-003.10. Their days show Waiting (identification) until the next check, within the hour, and are then accepted.

How do I try the advertising conversions during the trial?

The Google tag and Meta Pixel you fill in under Settings › Academy settings › Advertising load on your public registration pages as usual, in the visitor's browser: with real IDs they measure for real, also during the trial.

What the server sends to Meta and Google Ads is a demo during the trial:

  1. Switch on Also send conversions from the server. For Meta, the Meta Pixel ID is enough: no access token is needed. For Google Ads, click Connect Google Ads: it connects at once, without a Google account.
  2. Register as a visitor through your registration wizard (accept the marketing cookies) or let staff register a lead later.
  3. Each conversion shows in the Test inbox under Connections, as it would have gone to Meta or Google Ads, and in the figures of the conversions panel. Nothing reaches Meta or Google.

How do I try review invitations during the trial?

Review invitations (Settings › Review invitations) work during the trial, without asking any real customer:

  • Google and Tally: the request is an e-mail and/or text message to the customer, so it lands in the Test inbox, with the link the customer would click.
  • Klantenvertellen and Kiyoh: these platforms mail the customer themselves. During the trial they are a demo: no API token is needed and the Location ID can be any number (for example 123), Test channel shows a demo score, and each invitation shows in the Test inbox under Connections.

Switch on Ask customers for a review, click Add channel, and let a student pass an exam (or follow a first lesson): the invitation goes out at the next hourly run after the channel's delay.

Which messages do go out during the trial?

  • Messages addressed only to the e-mail address the school signed up with are really sent (and also shown in the test inbox, marked "Really sent as well"), so a password reset for your own account arrives.
  • BIQSDRIVE's own e-mails about the trial (the reminder before it ends, that it has ended, the confirmation of a go-live request, that the platform is live) are always sent.
  • Everything else, to customers, instructors, colleagues or any other address, only lands in the test inbox.

How do I go live?

  1. Click Go live in the strip at the top (/go-live).
  2. Fill in the Official name of the driving school, Street, Number, Postal code, City and E-mail address for invoices; VAT number, Phone and Remarks are optional.
  3. Tick that you agree to the terms of use and the data processing agreement, and click Ask to go live.

BIQSDRIVE then contacts you to finish the agreement. You can keep using the trial until then; the page shows the date you asked. The confirmation e-mail goes to the e-mail address the school signed up with. You can change the request until BIQSDRIVE has started on it: open Go live again, click Change my request, correct the details and click Save changes. The page then shows when it was last changed. You do not get a second e-mail for a change. Once BIQSDRIVE has started putting the platform live, the request can no longer be changed. When BIQSDRIVE puts the platform live:

  • the sample data and everything entered during the trial are removed, and the school is set up empty with the details from the request;
  • you sign in with the same e-mail address, password and two-step verification;
  • from then on, e-mails and text messages really reach your customers, and payments and other connections are real;
  • you get an e-mail "… is live", and the setup guide helps you set everything up.

What happens when the trial ends?

  • Five days before the end, the school's contact gets a reminder e-mail.
  • When the trial ends (at the end of its last day), the sample data and everything from the trial are removed. You can still sign in with the same e-mail address and password, but the app only shows Your trial has ended with the go-live form. Ask to go live there.
  • The e-mail that tells you the trial has ended also gives the date on which your platform will be deleted for good, together with your account and the details of your sign-up. Nothing is exported before that, so ask to go live before that date if you want to continue.
  • To try longer, ask BIQSDRIVE: they can extend a trial, or start a new one after it ended.

How do I use the setup guide?

Open Setup guide (/setup-guide): from the strip at the top during the trial, or once live from the line Setup guide: … of … steps done. above the page (Open). It lists the steps to get a school ready, each with Open to go to the screen where it is done:

  1. Look in the test inbox (trial only).
  2. Details of your driving school: name, address, VAT and recognition number, logo and colours (/settings/company).
  3. Locations: address, opening hours, establishment unit number (/settings/branches).
  4. Instructors (/resources/instructors).
  5. Vehicles (/resources/vehicles).
  6. Packages and prices (/resources/packages).
  7. Staff: invite colleagues and choose their role (/manage/users).
  8. E-mails and text messages: the texts customers get (/manage/mail-templates).
  9. Settings: text messages, online payment, reminders, cancellation rules (/settings/academy).
  10. Online registration (/manage/registration-wizard).
  • During the trial, click Done on a step once you looked at it (Not done yet undoes it): the sample school would otherwise count as set up from the start.
  • Once live, a step is ticked by itself as soon as it is in order (it then shows In order): the company has a VAT number and address, a location has an address, there is an instructor, a vehicle, a second user. The other steps you tick with Done.
  • Hide the guide removes the line above the page; Show the guide on the guide's page brings it back. The progress bar shows how many steps are done.

Good to know

  • Every public page of a trial school (the online registration, the customer portal, the payment test page and the information form) shows a strip saying that this is a test environment and that nobody should enter real data. It disappears when your school goes live.
  • Settings › Academy settings shows a note during the trial: online payments, the bank connection, the Autoveiligheid exam centres, the accounting package, itsme, the eID card reader and Dimona run on demo versions. Switch online payments, the accounting export and Dimona on as usual; the payment provider, API keys and credentials are not needed, and the Autoveiligheid exam centres, itsme and the eID card reader work without switching them on.
  • The test inbox, the setup guide and the go-live request are for users whose role has Licence and usage; the standard Administrator role has it.
  • Two-step verification is required for administrators, also during the trial.
  • The trial's licence has no seat or location limits. After going live, BIQSDRIVE installs the licence of your agreement; until then the school runs without a key (2 active instructors).

Not possible (yet)

  • Trying SBAT bookings during the trial: SBAT has no connection yet, for any school.
  • Keeping what you set up during the trial when you go live: the live platform starts clean.
  • Choosing a plan or price, or going live without BIQSDRIVE: the agreement is made with BIQSDRIVE.
  • Extending the trial yourself: ask BIQSDRIVE.

Did not find what you were looking for?

Submit a ticket